|
|
Tools for Datalogging and ReflashingWe have datalogging tools for Honda, GM, and Ford. We also have reflash tools for the GM OBD2. Please note that there are several variations of the items listed here available elsewhere on the site, so have a look around in the 'Shop by Vehicle' areas also! |
|
|
 |
| Displaying 1 to 6 (of 6 products) |
Result Pages: 1 |
| |
Product Name+ |
Price |
Buy Now |
 |
'ALDU1 and CABL1'
This is for any pre-1995 (OBD1) GM vehicle. Everything except the 1995 LT1. You should be able to datalog all of them, and reflash the 94 LT1 as well. Comes with XtremeALDL and NewCABL1 (RJ45/Moates-specific new style). There's a switch on the side which allows you to select 10k (across pins A&B of ALDL) or 'Open' mode. You use the 10k mode for older TBI and TPI setups, and the 'Open' for newer Speed density and LT1 stuff. This item can be used with TunerPro RT, TTS Datamaster, TunerCat reflash for LT1, WinALDL, and EFI Live V4(OBD1). |
$80.00 |
 |
 |
'APU1' AutoProm Package: USB Version
Does everything in one package, one USB-based device! USB-powered, so no power supply needed. Chip burning/reading, datalogging, and realtime emulation. Performs ALDL communications at 160/8192 baud, programs AT29C256 and 27SF512 chips. Has 3-channel 0-5v 10-bit A/D provision fpr wideband and other datalogging. Includes AutoProm device, 28-pin 18-inch emulation cable, OBD1-style ALDL cable CABL1, 6-ft USB cable, 1x 27SF512 chip, and Mark Mansur's TunerPro RT5 software license. PLEASE READ through product documentation to understand some of the features of this all-in-one, datalogging, realtime emulation tuning, and chip burning hardware. This item is for OBD1 GM vehicles ONLY. It is not for Hondas, Nissans, Fords, BMWs or other cars. If you are not sure whether this unit is the right choice for you, please email support prior to purchase. |
$329.00 |
|
 |
'Demon2'
The Demon 2 is the latest in our line of Honda/Acura-friendly technology. Flawless realtime emulation, embedded datalogging without a laptop, auxiliary inputs. This device is intended to be permanently installed in USDM ECUs. Gives all the power of the Ostrich, Hulog, RTP, and other products into one, and more. Full native compatibility with Crome, Neptune, eCTune, TunerPro, and others. USDM/EDM large case ECUs only! DOES NOT FIT JDM/small case ECUs! |
$249.00 |
|
 |
'QuarterHorse' for Fords
For a price of $249, the QuarterHorse delivers in unparalleled fashion. The QH plugs into the J3 port like a ordinary chip, but it allows bumpless, 100% realtime tuning AND datalogging while the engine is operating for all supported EEC-IV and EEC-V applications.
You can log ANY parameter in RAM from the EEC-IV and V ECM at sample rates well over 20 frames per second. All necessary cabling is included, but software is sold separately. |
$249.00 |
|
 |
'Xtreme HULOG Honda USB Datalog Interface'
With this device (an abridged/modified version of the ALDU1), you can perform datalogging on your Honda ECU using USB as your PC interface. Comes with converter box, USB cable, 4-pin CN2 port latching header, and a cable to go from the box to your 4-pin header on the ECU. Check the documentation section for an installation guide. |
$33.33 |
|
 |
O-Meter
This is a sweet item! Check out the documentation to understand what all this unit can do! Does AFR/Lambda/Universal display, data storage, etc. Check the pull-downs for combo offers with other wideband products for great savings! |
$75.00 |
|
| Displaying 1 to 6 (of 6 products) |
Result Pages: 1 |
|
|
